Lenovo Star Wars: Jedi Challenges Review

The Lenovo Star Wars headset finished behind the Google Daydream View, being a lot less comfortable and less visually immersive. However, it is much more interactive than the Daydream. We did find that the Star Wars headset is better than the Merge VR, but costs almost three times as much.

To determine which VR headset is truly the best out there, we bought the top products available today and pitted them against each other in a series of head-to-head challenges. We scored the performance of each piece of wearable tech on a scale of 0-100, based on its showing in each of our five weighted rating metrics: Interactiveness, Visual Immersiveness, Comfort, Ease of Setup, and User Friendliness, with the results of the Star Wars: Jedi Challenges explained below.

Interactiveness

The Star Wars headset performed reasonably well in our interactivness tests.

Foregoing a more typical hand controller, this model uses a lightsaber as a controller. The lightsaber has two buttons for activating Bluetooth control and tracking your motion.

The headset also has three buttons to allow you to select an option, cancel a selection, or return to the menu. We found the tracking to be about average, though it did feel a little sluggish and laggy when it came to the lightsaber fights.

There weren't really any limitations in terms of where you could go, but the VR experiences are structured in a way that they occur between your location and the sensor ball.

All in all, the motion tracking and interface methods are solid for this product, though it can get a little crazy in those high-intensity saber duels.

Visual Immersiveness

The Jedi Challenges headset again scored in the middle of the pack for visual immersiveness. This headset is actually augmented reality (AR) rather than virtual reality (VR), which means that you actually want ambient light to come in, as it superimposes the virtual Star Wars content over the physical environment you are in.

Unfortunately, we found this headset to have one of the narrowest field of views out of any of the models that we looked at. This felt a little crippling in lightsaber duels and left us vulnerable to attacks from the Sith.

However, the overall viewing quality is decent, with the image looking remarkably similar to the holograms from the movies. The image is quite sharp, though it is dependent on which smartphone you use. We tested with a Galaxy S8 and found it to be more than adequate.

Comfort

The Jedi Challenges headset was not very comfortable to wear. Plenty of other products greatly outperformed it.

While a true Jedi may have the fortitude to overcome the rather uncomfortable nature of this headset, we found that we did not. This product is a little on the heavy side and the included straps don't feel like they hold the headset very securely to your face. This product does have adequate padding, but overall it still feels quite awkward to wear.

This model did earn some points by having plenty of room for glasses and plenty of ventilation to keep your face from getting sweaty. This allows you to remain calm, cool, and collected as your command your forces against Imperial Walkers in Strategic Combat Mode.

User Friendliness

The user friendliness of the Jedi Challenges headset compared quite well with the other headsets in the pack. We had no issues getting it up and running.

Immediately, this headset earned some points by not forcing us to remove the case from our phone. There is plenty of room for most cases, though you may have to remove some of the bulkiest, waterproof cases. The headset connects to your phone by a short cord that plugs into the charging port, with the bundle including a few different cords to accommodate which ever flavor of charging port your phone has.

We also appreciated that it wasn't easy to accidentally press buttons on the phone when using this product, at least with the Samsung phone we tested with. This entire setup process only takes minimal effort once you have done it a few times. Finally, for most phones, it is usually very easy to plug in a pair of headphones, but it can be a little more difficult, depending on which phone you use and the port's location.

Ease of Setup

This headset is one of the easiest to set up. The hardware setup is a breeze, only requiring you to install the batteries and calibrate the lightsaber. This, and properly aligning the phone, can be a bit tedious depending on the phone, but it usually doesn't take more than 5-10 minutes.

The only required software is to install an app from wherever you usually download apps, following the on-screen instructions to install it. Most modern phones are compatible with this headset, but you should check the list of compatible phones on Lenovo's website before you purchase it.

Value

While this headset is a ton of fun and an excellent option for the Star Wars enthusiast, it can be a little pricey for a mobile VR headset. You are definitely paying for the Star Wars content and should look elsewhere if you are shopping on a tight budget.

Conclusion

All in all, we did thoroughly enjoy this headset. It's ton of fun, with new content released as subsequent Star Wars movies come out. If you don't mind paying a little extra for Star Wars and having a much more limited library of available content, then it's a great choice. However, if you are only looking for a mobile VR headset and the Star Wars content isn't a huge draw, then you would be much better served by the Google Daydream View or the Samsung Gear VR.