Milwaukee M18 Fuel 2853-20 Review
Our Verdict
Compare to Similar Products
This Product Milwaukee M18 Fuel 2853-20 | |||||
---|---|---|---|---|---|
Awards | Best Tool-Only Impact Driver | Best Overall Impact Driver | Best 12 Volt Impact Driver | ||
Price | $135 List $117.00 at Amazon | $179 List $134.49 at Amazon | $129 List $97.76 at Amazon | $140 List $110.00 at Amazon | $120 List |
Overall Score | |||||
Star Rating | |||||
Bottom Line | This impact driver offers fantastic speed and torque in a compact package | If you want an ultra-fast and strong impact driver with an efficient battery, this model is the one | If you want a high performance impact driver that can hang with the best, this is a good choice | A solid addition for those that already have a bevy of DEWALT tools, but carries a heftier price tag than most | When it comes to 12-volt impact drivers, it's hard to beat the performance of this model |
Rating Categories | Milwaukee M18 Fuel... | Kobalt XTR Max 24V | Makita XDT13 | DeWalt MAX XR DCF887B | Milwaukee M12 Fuel... |
Speed (35%) | |||||
Torque (25%) | |||||
Convenience (20%) | |||||
Battery (15%) | |||||
Noise (5%) | |||||
Specs | Milwaukee M18 Fuel... | Kobalt XTR Max 24V | Makita XDT13 | DeWalt MAX XR DCF887B | Milwaukee M12 Fuel... |
Average Measured Total Time for Lag Bolt Test | 16 seconds | 13 seconds | 21 seconds | 23 seconds | 37 seconds |
Average Measured Time: Plywood Ledger Screw Test | 3 seconds | 3 seconds | 4 seconds | 4 seconds | 6 seconds |
Average Measured Fastening Torque | 300 ft-lb | 300 ft-lb | 282 ft-lb | 238 ft-lb | 143 ft-lb |
Average Measured Breaking Torque | 300 ft-lb | 300 ft-lb | 300 ft-lb | 300 ft-lb | 275 ft-lb |
Average Measured Time: 3-2'x12' Ledger Screw Test | 2.0 seconds | 2.1 seconds | 2.8 seconds | 2.8 seconds | 3.7 seconds |
Battery Test Screws Driven | 68 | 117 | 78 | 62 | 44 |
Measured Length | 116 mm | 139 mm | 126 mm | 136 mm | 132 mm |
Average Measured Decibels While Using | 99 dBa | 96 dBa | 97 dBa | 100 dBa | 97 dBa |
Impact Driver Model # | 2853-20 | KXID 124B-03 | XDT13 | DCF887 | 2553-20 |
Quick Bit Insert | Yes | No | Yes | Yes | Yes |
Bit Holder | Yes | No | No | No | No |
Multiple Fastening Modes | Yes | Yes | No | Yes | Yes |
Our Analysis and Test Results
Following our in-depth testing, it became very apparent that the Milwaukee M18 Fuel is a top-notch impact driver. The aspect in which it stands out the most is its speed — this model is the fastest impact driver we've ever tested.
Performance Comparison
Speed
The M18 Fuel is about as fast as an impact driver gets. Our speed test consisted of driving 3-⅝" ledger screws into a stack of plywood thick enough to provide enough wood for the entire depth of the screw. We drove several screws and took an average time for each driver. The M18 Fuel smoked through this assessment with an incredible average of 3.3 seconds.
To amass more numerical data for speed, we drove a ½" x 3" lag bolt into a stack of 2x12 boards and timed how long it took to drive the bolt and remove it completely. We used an 11/32" bit to drill pilot holes so as not to split the boards and to give each bolt as close to the same resistance as possible.
The M18 Fuel put most of the competition to shame in this race — it was able to drive the lag bolt in 12 seconds, and it took a mere 4 seconds to remove it. For reference — the average for the whole group was 30 seconds in and 12 seconds out.
Torque
The amount of torque these devices deliver is a key reason to want to own an impact driver. The Milwaukee M18 Fuel did not disappoint during this assessment.
For this test, we welded ¾" bolts onto an I-beam, then used each impact driver to tighten the nuts until they couldn't twist any further, then we measured the maximum amount of torque each driver could loosen. We made all of our measurements using a mechanic-grade torque wrench.
Earning a perfect score for this metric, the M18 Fuel maxed out our 300 ft-pound torque wrench during both tests.
Convenience
Convenience combines subjective assessments such as features or aspects of the design that make the driver easier to use with objective measurements such as weight and dimensions. Convenience is a strong metric for the M18 Fuel; it finished near the top of the pack.
There are plenty of features to love on the Milwaukee M18 Fuel. It has four RPM settings — three different speeds and a “finish” setting. The selector button to switch between the modes is conveniently located right at the bottom front of the handle, and the button is easy to push.
Most newer impact drivers have a light — the M18 Fuel is no different. On this Milwaukee model, it is located in between the chuck and the trigger. We found that the light on this driver is bright and shows a consistent pattern. Also, we love that the light turns on when the trigger is slightly depressed. On some models, the actual driver has to be engaged for the light to turn on, making it difficult to look at what you're doing before driving your fastener.
One of our favorite features of the Milwaukee M18 Fuel is that it has a small front-to-back length. At a mere 116mm, this tool will easily squeeze into tight places where other drivers simply won't fit.
The M18 Fuel has a bit quick insert, which allows you to attach or detach bits with one hand easily. It also includes a bit holder on one side and a belt hook on the other. The user can interchange them depending on personal preference.
Battery
To test batteries, we alternated between two different exercises. To begin, we drove in over 10 screws — we then drove a ½" x 3" lag bolt in and out. We kept going until the driver ran out of battery.
This was not the strongest metric for the Milwaukee M18 Fuel. It completed four full sets of the ledger screws and the lag bolt driving and removal but died after driving four ledger screws on the fifth set.
Noise
To measure noise, we took several readings with a sound pressure level meter while driving ledger screws into wood, then calculated an average. We couldn't give out any decent scores for this metric because even the best impact drivers are painfully loud.
The Milwaukee M18 Fuel wasn't the worst impact driver in the noise department during our testing period, but it certainly wasn't the best. With an average volume of 99 decibels, this model produced a tiny bit more noise than the average for the group, which was 98 decibels.
We recommend checking with Milwaukee to see what type of ear protection they suggest using while operating this product.
Should You Buy the Milwaukee M18 Fuel?
The Milwaukee M18 Fuel is fast, powerful, and compact. It has several features that make it attractive to the harshest of tool critics. We wish that the battery lasted a little bit longer, mainly because purchasing extra Milwaukee batteries can get downright expensive. But after putting it head-to-head against the best impact drivers on the market, this seems like a minor criticism — we still think it's well worth the extra investment.
What Other Impact Drivers Should You Consider?
While the M18 Fuel is expensive for an impact driver, its excellent performance makes up for any additional costs. If you don't need as much power and instead favor size and convenience, check out the 12-volt Milwaukee M12 Fuel.